Power Tiller
How to use the power tiller safety?
Before operating mini tiller, please read carefully operation and maintenance instructions to fully get acquainted with all the operating mechanisms and the correct method to operate the mini tiller, grasp how to stop and rapidly separate operating mechanism.
1. Make sure there are no other people or objects that lead to potential safety hazard, especially children and pets.
2. Before starting the engine, leave the gear lever of the gearbox in neutral gear, and hands and feet shall not approach rotating parts or be put below the rotating parts.
3. Before engine is started, any adjustment to each mechanism of mini tiller is forbidden.
4. Only the additional device and equipment that are permitted by mini tiller manufacturer can be used (such as balance weight).
5. Before cleaning, maintaining or checking the mini tiller, the engine must be stopped and make sure that all the moving parts have all be stooped.
6. Once there is abnormal vibration of the mini tiller, the engine shall be stopped immediately! Check out the reason because vibration normally is an indication of breakdown.
7. When the mini tiller is under unmanned operating state, all possible precautions shall be taken: separate power output shaft, lower additional device, set neutral gear and stop the engine!
Personal safety protection
1. Do not operate the mini tiller if a suitable overcoat is not worn. In slippery floor, wearing skid-proof shoes will improve standing stability.
2. Before any operation, such as preparing to operate and maintain, safety glasses shall be worn.
3. When operating on (or crossing) gravel road, pavement or highway, please keep vigilant and take care of traffic conditions to prevent potential traffic hazard. It is forbidden to carry passengers at any time.
